Common Assumptions, Questions, and Answers Regarding Asbestos
January 6, 2021 No Comments
Q: My home was built after the cutoff date, there is no way there is asbestos, right ? A: Incorrect, many materials already contain asbestos
Mold has one main purpose—to decompose. This alone is the basis for the negative effects it has on our homes. Once colonization begins, mold can literally eat away at our homes and weaken or even destroy its structural integrity if left untreated for a prolonged amount of time.
When decomposition occurs on our property, the damage can be expensive and sometimes permanent. It is estimated that mold damage repairs cost homeowners over $1 billion annually which has prompted the spike in pre-purchase home inspections—and rightly so. Hidden building components like wooden studs, the backs of walls, and other structural members can usually be repaired, but the further the extent of the mold damage – the more expensive it is. If you are purchasing a home or new property, a low-cost mold inspection by an experienced mold inspector is worth taking the time to do. If a mold problem is identified, then you can avoid assuming the cost and liability of remediation. On the other hand, if no mold is found then the property gets a clean bill-of-health and you get the peace of mind that your new home and your health won’t be compromised by mold. As the saying goes, “An ounce of prevention is worth a pound of cure.”
Mold is everywhere and affects everybody differently. Many people will not experience any health issues when exposed to mold, even at high levels; on the other hand, some experience severe health issues with low levels of mold exposure. Children and the elderly are the most susceptible, accounting for the majority of health related issues. What’s more, people with impaired respiratory or immune health are more vulnerable. Common symptoms related to mold are: inflammations, nasal and sinus congestion, dry cough, wheezing, sore throat, shortness of breath, burning eyes, skin irritation, central nervous system problems, and other respiratory problems.
If you are experiencing any adverse health effects related to the time spent in your home, contact your local mold inspector to assess the property.
To ensure water damaged areas are thoroughly dried and you are in compliance with your home insurance policy, avoid doing it yourself and call a professional!
As an unregulated hazardous material, many Do-It-Yourselfers choose to save money and take on the task of mold mitigation without the help of professionals. In my experience, these DIYers, oftentimes landlords looking to cut corners, tend to overlook an important piece of the mitigation protocol and within a matter of months, guess whose back?! A formal mold inspection with report comes at a very minimal fee, takes less than an hour to conduct, and provides site-specific and industry-driven protocol to remediate the mold problem for good—that value cannot be captured in an at-home mold self-test kit.
Even if you are a DIYer, there are still ways to make sure the problem is gone for good. To ensure mold remediation is completed successfully, have a Post-Remediation Verification (PRV) done before tearing down your contained work area. This PRV protocol is a post mold mitigation clearance inspection and testing service that provides visual and analytical verification that the mold has been removed from all affected areas. In addition, a PRV uses moisture identifying equipment and samples analyzed by an accredited laboratory to assess the air quality and ensure the area is safe for re-occupancy and ready to be rebuilt. Upon the successful completion of remediation, a formal PRV report is given to the client which substantiates its completion and provides the property with a clean bill-of-health.
The rate at which mold colonizes varies based on conditions and spore type. Basically, the larger and wetter the affected area is, the bigger the problems will be. The Environmental Protection Agency recommends you, “Act quickly since mold damages what it grows on, and the longer it grows, the more damage it can cause.” They also recommend drying water-damaged areas within 24-48 hours to prevent mold growth—sooner if it is category 3, bacteria-containing sewage water. Promptly addressing water losses could also ensure you are in compliance with your insurance policy. Most policies will cover water damage, but mold remediation could end up being an out-of-pocket expense. To put it plainly, water damaged areas should be dried quickly and thoroughly.
If you are unsure of what to do when you have a water loss in your home, contact a restoration professional in your area. If there is no noticeable water damage on your property, but you are experiencing adverse health effects or smell musty odors, contact a mold inspector. Our team at BuildSafe can provide you with a low-cost, visual mold evaluation and advise you of the best steps to take to ensure your home and health is protected. As an independent third-party consultant, we can also refer a reputable, professional mold mitigation or restoration contractor in your area. A great first step to take is just making the phone call. So don’t wait – phone consultation is free!
Cleaning up After a Flood: Addressing Mold Problems. Environmental Protection Agency, PDF file. <http://www.epa.gov/katrina/outreach/mold.pdf>.
Dampness and Mould: WHO Guidlines for Indoor Air Quality. Germany: Druckpartner Moser, PDF file.
Q: My home was built after the cutoff date, there is no way there is asbestos, right ? A: Incorrect, many materials already contain asbestos
Asbestos is regulated by the Colorado Department of Public Health and Environment (CDPHE). Local, state, and federal regulations regarding the same handling of asbestos containing
When buying a new home, there are several things you are looking for when deciding which home best suits you and your family. One thing
Asbestos: What materials are considered suspect? In the state of Colorado, you must presume any suspect material is asbestos-containing until you have it tested by
Why Restoration Companies should not self-test for Asbestos As the general contractor for property loss insurance claims, restoration companies are a wheel-house for renovation and
Cleaning up After a Flood: Addressing Mold Problems. Environmental Protection Agency, PDF file.
Dampness and Mould: WHO Guidlines for Indoor Air Quality. Germany: Druckpartner Moser, PDF file.
©2020, BuildSafe Environmental Consulting. All Right Reserved. Privacy Policy | Terms and Conditions
